The Smart Gateways Smart Meter WiFi gateway allows you to connect a smart meter via WiFi to Home Assistant (including the new energy dashboard), Domoticz, Homey, DSMR-Reader and countless home automation solutions! This gateway is exactly the same as the Smart Meter WiFi Gateway but with clear display.
Suitable for smart meters in multiple countries
With native support for Smart Meters from:
- The Netherlands
- Belgium
- Sweden
- Denmark
- Finland and
- Hungary
See our compatibility list for supported meters.
Click here for the detailed description
Click here for frequently asked questions
Characteristics:
- Easy to configure via a configuration portal
- Clear LCD Display
- Provides support for all types of smart meters
- Gas and Watermeter (fluvius) readings are also available if connected to your smart meter
- Advanced Energy Dashboard for Home Assistant, exclusively for Smart Gateways users! Including the default Home Assistant Energy Dashboard.
- Can be powered by the P1 port of the smart meter (see the compatibility list)
- Works only on 2.4 Ghz wifi
- Including P1 connection cable of +/- 50cm to connect to the smart meter (6 pin RJ12 connector on both sides)
- Future-proof due to regular free firmware updates
- Based on the powerful Dual-Core Tensilica Xtensa LX6 microprocessor with a clock speed of 240Mhz with 4MB of working memory
- leaves the inferior ESP8266 and ESP12-based solutions far behind, enabling it to handle multiple heavy-duty tasks simultaneously
- Telnet support (up to 5 simultaneous sessions)
- MQTT support with adjustable prefix and interval. Including secure MQTT over TLS
- API Web page
- Static IP address assignment and DHCP support
- Can be paired simultaneously with Home Assistant, Domoticz, Homey, DSMR reader and OpenHAB allowing these products to be used side by side.
- Works without internet connection
The meter type can be easily changed through the gateway’s firmware menu. The gateway comes standard with the Dutch DSMR4+5 firmware. After installation, the appropriate meter can be selected via the gateway’s firmware menu. The gateway then automatically installs the appropriate firmware. Thus, if a new meter is installed, the firmware can easily be changed.
Comes with step by step instructions so that installation is possible within 5 minutes. More information including detailed instructions on our Support Page.