Insight into energy consumption
… AND solar production!
Introducing the Smart Meter WiFi Gateway – your ultimate energy consumption manager! Keep track of your energy usage and monitor your solar panels’ production with ease. With its cutting-edge features, you can now detect standby consumers and even keep tabs on your car’s charging station consumption.
Take your energy-saving game to the next level by seamlessly connecting the Smart Meter WiFi Gateway to your home automation system. Get instant access to valuable insights and discover areas where you can save more energy and reduce your carbon footprint.
Say goodbye to the hassle of manually reading your smart meter – the Smart Meter WiFi Gateway takes care of it all for you! Don’t miss out on this must-have device for your home.
Works on all smart meters
The Smart Meter WiFi Gateway works on all smart meters in:
Click here for a list of supported meters
Specially developed for home automation!
Unlock the full potential of your home automation system with the Smart Meter WiFi Gateway! Seamlessly integrate it with a wide range of platforms such as:
- Home Assistant (Telnet and MQTT Autodiscovery)
- Domoticz
- Homey via our Smart Gateways App
- DSMR-Reader
- OpenHAB
- P1 monitor
- Fibaro
- Grafana via InfluxDb and Mosquitto
- …And numerous other packages
With step-by-step tutorials available on our support page, linking the Smart Meter WiFi Gateway with your preferred home automation system has never been easier! Say goodbye to complicated installation processes and enjoy hassle-free connectivity.
Upgrade your home’s energy management system with the Smart Meter WiFi Gateway today and experience unparalleled convenience and efficiency!
No power supply required
Say goodbye to the hassle of powering your gateway! The Smart Meter WiFi Gateway is designed to work seamlessly without requiring an external power source for most meters in the Netherlands, Belgium, Sweden, Finland, Denmark and Hungary.
Only older meters with a DSMR version of 4 or lower require the optional power supply. Not sure if your meter falls into this category? Don’t worry! Simply check the DSMR version on your smart meter, and a comprehensive list of compatible meters is available on our compatibility list page.
Experience hassle-free energy management and connect your Smart Meter WiFi Gateway with ease today!
Also gas consumption insight
Managing your home’s energy consumption has never been easier! With the Smart Meter WiFi Gateway, you can now effortlessly monitor not only your electricity usage but also your gas consumption. That’s right – the Smart Meter WiFi Gateway is seamlessly linked to your smart electricity meter and transmits your gas consumption as well!
If you have an older intermediate gas meter, don’t worry! We’ve got you covered with our Smart Gas Meter Gateway. Keep track of your gas consumption and manage your energy usage with ease and convenience.
Upgrade your energy management system today and discover the benefits of the Smart Meter WiFi Gateway and Smart Gas Meter Gateway!
and water consumption
(in Belgium only)
Exciting news for our Belgian customers! Fluvius has launched a pilot program for installing smart water meters, enabling you to monitor your water consumption with the Smart Meter WiFi Gateway. Keep an eye out for these smart water meters, typically identified by their digital displays, and take control of your energy and water usage today!
While there are currently no plans to roll out smart water meters in the Netherlands, our comprehensive Energy Dashboard still allows you to track your water usage if paired with a smart water meter. With our Smart Meter WiFi Gateway Dashboard and Default Home Assistant Energy Dashboard, you can effortlessly manage all aspects of your home’s energy, gas and water consumption, reducing your environmental impact and lowering your energy bills.
Internal Web Server
Experience effortless energy management with the Smart Meter WiFi Gateway! Our gateway boasts an internal web server with an intuitive portal that displays real-time energy consumption or feed-in. Keep track of your energy usage and optimize your energy consumption with ease.
We believe in constantly improving our products to meet your needs, which is why our firmware can be easily updated or converted to accommodate different meter types. Plus, adjusting settings and monitoring the status of your gateway is a breeze with our user-friendly interface.
Upgrade your home’s energy management system with the Smart Meter WiFi Gateway today and enjoy unparalleled convenience and efficiency!
*The available meter readings vary by meter type, the dashboard is now available. The dashboard complements Home Assistant’s existing energy dashboard.
Energy Dashboard
Exclusively for Smart Gateways users!
Attention all Smart Gateways users! We’re excited to introduce our latest offering – the Smart Gateways Energy Dashboard for Home Assistant.
With this innovative dashboard, you can easily view all the data from your smart meter in one comprehensive overview. What’s more, you can even monitor the current and voltage per phase, providing a detailed understanding of your energy consumption patterns.
Unlike other solutions, our gateway makes all the data from the meter available, which means our dashboard provides even better insight. This empowers you to be more energy conscious and make informed decisions about your energy usage.
Imagine turning on your water heater using our smart plugs at times when your solar panels are feeding back, resulting in significant energy savings!
The Smart Gateways Energy Dashboard for Home Assistant is the perfect complement to Home Assistant’s existing energy dashboard. Upgrade your energy management system today and experience unparalleled convenience and efficiency!
Smart meter reading via MQTT
Unlock the power of IoT with the Smart Meter WiFi Gateway! Our gateway boasts support for MQTT, a cutting-edge protocol developed specifically to transfer data from IoT devices as efficiently as possible.
By leveraging MQTT, our gateway enables you to effortlessly transmit data from your smart meter over the Internet, providing real-time insight into your energy consumption patterns. With this powerful feature, you can optimize your energy usage and make informed decisions about your energy consumption, all from the comfort of your own home.
MQTT-TLS (Secure connection).
Our gateway not only provides support for MQTT, but also boasts a secure connection using MQTT via TLS to send data from your smart meter over the Internet.
This advanced feature makes the Smart Meter WiFi Gateway an ideal solution for companies looking to offer energy consumption data to their customers via a cloud service. With our gateway, you can rest assured that your energy consumption data is transmitted securely and with utmost privacy.
Remote Firmware Update
Experience the convenience of hassle-free firmware updates with the Smart Meter WiFi Gateway! Our gateway enables remote updates, eliminating the need for on-site visits and providing a seamless user experience.
In the event of a new firmware update release, you can rest assured that your gateway will be updated remotely, ensuring that your energy management system stays up-to-date and at peak performance. Say goodbye to the hassle of on-site visits and hello to the convenience of the Smart Meter WiFi Gateway!
Smart meter reading via REST API (JSON)
Our gateway boasts an internal web server that provides all available data from your smart meter in easy-to-use JSON format.
By leveraging this powerful API, you can connect your smart meter to a wide variety of home automation software, ensuring that your energy management system is always compatible and future-proof. With the Smart Meter WiFi Gateway, you can rest assured that you’ll always have the flexibility to switch to other software and systems without missing a beat.
*Please note that the available meter readings may vary by meter type.
Reading smart meters via Telnet
Our gateway comes equipped with a built-in telnet server that offers all data from the smart meter in its original form, allowing you to convert it into usable data as needed.
With support for up to 5 simultaneous telnet sessions, the Smart Meter WiFi Gateway makes it easy to use multiple home automation packages side by side, including popular options like DSMR Reader, Home Assistant, and Domoticz. This feature is especially useful for users who want to gradually migrate to new home automation software or read the smart meter with multiple packages at the same time.
Upgrade your energy management system with the Smart Meter WiFi Gateway today!
Extensive manuals available
New manuals become available regularly. Please refer to the following links for the manuals
Check out our support page for detailed manuals
Frequently asked questions…
Can I read the smart meter with an app?
The smart meter can be read with an app. This requires the smart meter gateway with home automation software of your choice such as Home Assistant, Domoticz, DSMR-Reader, Homey, OpenHAB, Grafana or P1 monitor. Most home automation software also offers app for iPhone (IOS) or Android. This allows the smart meter to be read via the Internet, remotely via a cell phone. Take a look at our support page for manuals.
Can I also read the smart meter without additional software or hardware?
Yes that is possible. On the internal web server you can see the current consumption or feed-in. This refreshes every 10 seconds. However, no historical records are kept.
Is reading the smart meter free?
Reading the smart meter is free. Energy suppliers do not charge for this.
How can I read my smart meter?
A smart meter can be read through the P1 port. This is a 6-pin port similar to an old-fashioned telephone jack. The smart meter gateway comes with a 50cm cable that fits into this port.
How do I activate the P1 port of the Smart Meter? (For Belgium only)
It is necessary to open and activate the P1 port of your electricity meter so that Smart Meter WiFi gateway can read your consumption data for electricity and natural gas. Indeed, through your electricity meter, the gateway reads your consumption data for both electricity and natural gas. Moreover, as long as the P1 port is not open and active, it cannot power your meter module and the gateway will not start. To activate your P1 port, go to the Fluvius website.
Can I also see what my solar panels are feeding back through the smart meter?
Through the P1 port, the smart meter also provides the data that shows the feed-in from solar panels. However, this is net consumption or net feed-in. This means that the energy your panels generate is subtracted from the energy you use in your home. In the case of a three-phase connection, there may even be consumption on one phase and supply on the other two phases. Suppliers of solar panels these days also often provide an app that allows the real yield to be tracked. Only the combination of the Smart Meter WiFi Gateway with the solar panels’ app gives a total picture of energy consumption and yield.
Can I also read gas consumption through the smart meter?
Most gas meters in the Netherlands and Belgium are linked to the smart meter. This is done with new meters via a wireless connection. With old meters, there is often a cable between the two meters. This makes it possible to also read natural gas consumption with the smart meter gateway. Smart gas meters are often identified by a digital display. If your gas meter is not yet smart, you may be able to make it smart with our Smart Gas Meter WiFi Gateway.
Can I also read the water consumption through the smart meter?
In Belgium, Fluvius has started a pilot for installing smart water meters. These are placed on a small scale. This is done with new meters via a wireless connection. This makes it possible to also read water consumption with the smart meter gateway. Smart water meters are often identified by a digital display. If your water meter is not yet smart, you may be able to make it smart with our Smart Water Meter Gateway. This only applies to Belgium. There are no plans to roll out smart water meters in the Netherlands. The comprehensive Energy Dashboard shows water usage if a smart water meter is paired with the smart meter.
I can see the electricity consumption, why can’t I see my gas consumption yet?
Smart gas meters usually transmit gas consumption to the smart meter once an hour. With new gas meters, this is sometimes every 10 minutes. So it may take some time for the gas consumption to be transmitted by the Smart Meter WiFi gateway. So be patient, the gas consumption will appear automatically.
Can I connect multiple devices to the P1 port of the smart meter?
Multiple devices can be connected to the P1 port of the smart meter. Sometimes an electric car charging station also comes with a P1 gateway that allows the charging station to charge smartly. In this case, choose the optional P1 Splitter to connect both gateways. When using a splitter, both gateways should be powered separately.
How much power does the P1 port of the smart meter supply?
The current supplied by the P1 port depends on the DSMR version. Old meters with DSMR2 do not supply power. Meters of version DSMR4 deliver 100mA and meters of version DSMR5 deliver 250mA.
Do I need a power supply for the smart meter wifi gateway?
The smart meter wifi gateway uses about 40mA with peaks of 200mA. This means that the gateway works without external power only at meters of DSMR5. Thus, older meters of DSMR version 2 and 4 require the optionally available power supply. Meters in Belgium, Sweden and Luxembourg all provide enough power to run the gateway without a power supply.
How do I recognize the DSMR version of my smart meter?
The DSMR version is usually on the smart meter. In some cases, the manufacturer has chosen to call the version ESMR or SMR. This does not matter to the gateway. The number after DSMR, ESMR or SMR determines the final version when selecting the correct meter when ordering.
How can I change the firmware of the Smart Meter WiFi gateway?
There are a number of different firmware versions for the Smart Meter WiFi Gateway:
- Netherlands – DSMR 2
- Netherlands – All other meters (versions 4 and 5)
- Belgium – All types of smart meters (SMR 5)
- Sweden – All types of smart meters (SMR 5)
- Hungary – All types of smart meters (SMR 5)
If you want to change the firmware of your Smart Meter WiFi gateway because you have moved, for example, you can easily do this yourself via the gateway’s built-in firmware menu. Installation takes about a minute or two. After that, the gateway can be used on another type of smart meter.
What is the difference between a P1 dongle, Smart Reader and the Smart Meter Wifi Gateway?
The Smart Meter WiFi Gateway should not be confused with a P1 dongle or Smart Reader. Be sure to use the original gateway from Smart Gateways. Only this gateway works with all home automation software and offers all the functionalities described above. Where other products focus on one type of home automation software , the Smart Meter WiFi Gateway supports them all!
Can I use the Smart Meter WiFi gateway without an Internet connection?
The Smart Meter WiFi Gateway can be used without an Internet connection. All options are retained. The gateway checks for a firmware update every hour. If this is not possible because the Internet connection is down for a while, or you have blocked Internet access for security reasons, the gateway just keeps working. By the way, we do recommend that you still connect the gateway to the Internet from time to time. That way you can be sure you are using the latest firmware.
How do I know if a new firmware is available for the Smart Meter WiFi Gateway?
The gateway checks for new firmware every hour. If so, the blue LED on the gateway will flash rapidly. You can also see the installed firmware version and available firmware via MQTT or the Web server API. If a major firmware update becomes available we will notify users via email. For minor updates, we will notify you via the firmware changelog on the support page. The changes of each update are also described here.
How can I update the Smart Meter WiFi Gateway firmware?
You can, if a new firmware is available, update the firmware by briefly pressing the button on the gateway. If you linked the gateway via MQTT then you can publish “yes” to the topic “/dsmr/smart_gateways/install_update” without quotes. If you use the Smart Meter dashboard within Home Assistant, you can also update the firmware of the Smart Meter WiFi Gateway through the dashboard.
How can I read my smart meter with Home Assistant?
The smart meter can be easily read with Home Assistant. The new Energy Dashboard is supported by default. Take a look at our support page for the step by step guide.
How can I read my smart meter with Homey?
The smart meter can be easily read with Homey. To do this, install our Smart Gateways app for Homey. Take a look at our support page for the step by step guide. Through the Homey app, our Water Meter Gateway, Gas Meter Gateway and WarmteNet for District Heating with WarmteLink can also be read. So we have a wide range of products to map energy consumption!
How can I read my smart meter with Domoticz?
The Smart Meter can be read via the Smart Meter WiFi Gateway with Domoticz. This can be done via a telnet connection. This can be configured in a few simple steps. The manual for this can be found on our support page.
Can I still read my own meters on a smart meter?
Yes, you can. Both the gas and electricity meters allow you to read your readings from the display. Exactly like the traditional meter. Need help reading your meter? If so, read the manual for the smart meter installed on your premises. This is available from your grid operator.
I do not have a smart meter and want to change it for a smart meter
Network operators offer a one-time free smart meter to anyone with a home connection. If a smart meter is installed, the grid operator chooses the brand and meter type. This takes into account the connection, the situation and technical (im)possibilities. This is because it matters whether you use a lot or little energy and whether you have a solar panel installation. If you want to request a smart meter earlier or switch energy meters, you may be charged a fee. These costs can range from €60.00 to €300.00. If you want to start feeding back because you have solar panels, a meter change is often even free.
I have an old electricity meter and still want to make it smart, is it possible?
This is possible in some cases. The S0 Gateway from Smart Gateways is suitable for this purpose in certain cases. By connecting the S0 Gateway to the old electricity meter, it can still often be read with Domoticz, Home Assistant and other home automation software.
Smart Gateways B.V.
Bank: NL41 KNAB 0602 8741 49
KvK: 88551997
BTW/VAT: NL864683522B01
Telefoon: +31 (0)77 400 1412
Levering
Bestellingen op werkdagen geplaatst voor 16.00 uur worden indien mogelijk dezelfde dag nog verstuurd. Soms kan dit een dag langer duren. Levering in Nederland vindt meestal de volgende werkdag plaats.
Retourbeleid
Artikelen kunnen binnen 14 dagen geretourneerd worden. De instructies zijn te vinden op de contactpagina.
